GE Medical Dash 4000

Click to enlarge

Monitor with 12 Lead Interpretive
ECG, BP, SPO2, Resp, and Temp
Optional Printer and Gas Monitoring
-Call for Pricing- Factory Refurbs Available

DISPLAY
• Size: 10.4-inch (diagonal)
• Type: Active-matrix color LCD
• Resolution: 640 by 480 pixels
• Number of traces: 6 (maximum)

ECG
• Standard leads available: I, II, III, V, aVR, aVL,
and aVF
• 10 leadwire cable: I, II, III, V, aVR, aVL, aVF, V2, V3,
V4, V5, V6
• Leads analyzed simultaneously: I, II, III, and V
(multi-lead mode)
• Lead fail: Identifies failed lead
• Alarms: User-selectable upper and lower heart
rate limits

RESPIRATION
• Measurement technique: Impedance
variation detection
• Range:
• Respiration rate: 0 – 200 breaths per minute
• Base impedance: 100 – 1000 .at 52.6 kHz
• Detection sensitivity: 0.4 to 10 .variation
• Waveform display bandwidth: 0.1 to 1.8 Hz
(–3 dB)
• Alarms: User-selectable upper and lower
respiration rate limits, and user-selectable
apnea limit

TEMPERATURE
• Number of channels: 2
Input specifications
• Probe type: YSI Series 400 or 700
(determined by input cable)
• Temperature range: 0°C to 45°C (32°F to 113°F)
• Resolution: ± 0.1°C

INVASIVE BLOOD PRESSURE
• Number of channels: 2 (optional)
• Transducer sites: Arterial, femoral artery,
pulmonary arterial, central venous, right atrial,
left atrial, intracranial, and special

PULSE OXIMETRY
• Parameters monitored: Arterial oxygen
saturation (SpO 2 ) and peripheral pulse rate (PPR)
• SpO 2 range: 50 – 100%
• PPR range: 30 – 300 beats per minute

CO2
Information displayed
Inspired and expired CO 2 concentrations
in %, mmHg, or kPa; respiratory rate,
continuous CO 2 waveform
Measurement range
• Pi CO 2 /Fi CO 2 : 0 to 100 mmHg / 0 to 13%
• Pe CO 2 / Fe CO 2 : 0 to 100 mmHg / 0 to 13%
• RR: 0 to 120 breaths/min

DINAMAP
NONINVASIVE BLOOD PRESSURE
• Measurement technique: Oscillometric
• Displayed parameters: Systolic, diastolic, and
mean pressures, time of last measurement
• Measurement modes: Manual, auto, and stat in
Adult ICU and OR modes; manual and auto in
neonatal mode
• Measurement range(s): Resolutions of
5 mmHg up to Maximum Adult/Pediatric/
Neonate limits
Systolic:
• Adult: 30-275mmHg
• Pediatric: 30-235mmHg
• Neonate: 30-135mmHg
MAP:
• Adult: 20-260mmHg
• Pediatric: 20-260mmHg
• Neonate: 20-125mmHg
Diastolic:
• Adult: 10-220mmHg
• Pediatric: 10-220mmHg
• Neonate: 10-110mmHg
Pulse rate, as displayed in Vital Signs window:
• Adult: 30-200 bpm
• Pediatric: 30-200 bpm
• Neonate: 30-200 bpm
Cuff pressure range:
• Adult: 0-275mmHg
• Pediatric: 0-235mmHg
• Neonate: 0-135mmHg
• Automatic cycle times: 0 to 8 hours
• Tubing length: 12 feet adult, 8 feet neonatal
• Automatic cuff deflation: Cycle time
exceeding 3 minutes (90 seconds neonatal),
power off, or cuff pressure exceeds 294 mmHg
(±6 mmHg) adult, 147 (±3 mmHg) neonatal

BATTERY
• Battery type: Exchangeable Lithium-Ion
• Maximum number of batteries: 2
• Voltage: 11.1 V (nominal)
• Capacity: 3.9 Ah
• Charge time: Less than 4 hours each
• Run time: 4 to 5 hours
• Battery life: 500 cycles to 50% capacity

ENVIRONMENTAL
SPECIFICATIONS
• Power requirements:
– 90-132 VAC 50/60 Hz 2.0A
– 190-264 VAC 50/60 Hz 1.0A
• Power consumption: 75 W (fully loaded)
• Cooling: convection
• Heat dissipation: 240 Btu/hr (max)

PHYSICAL SPECIFICATIONS
Height: 27.4 cm (10.8 in)
Depth: 24.3 cm (9.6 in)
Width: 29.3 cm (11.5 in)
Weight: 5.5 kg (12.2 lb)

Smart Anesthesia Multi-gas Module (SAM)
Integrated anesthesia gas and vital signs monitoring

GE Medical Systems Information Technologies Smart Anesthesia Multi-gas Module provides
breath-by-breath analysis of respiratory (O2*, CO2) and anesthetic gases (N2O and
commonly
used halogenated agents). Utilized in conjunction with GE Medical Systems Information
Technologies anesthesia vital signs monitors the SAM module provides: display of the CO2
waveform, inspired and expired digital gas values including respiratory rate, integrated alarms,
and
graphic and tabular trend values.

The SAM module features:
Miniaturization and physical integration into the GE Medical Systems Information
Technologies
Tram-rac® vital signs housings
Automatic identification of agents
Instantaneous anesthetic agent identification and quantification; alone or in a mixture
Fast oxygen analysis provides inspired and expired oxygen values and waveform
Minimal room air calibrations
Rapid warm-up to full specifications
Moisture protection with GE Medical Systems Information Technologies exclusive
Aqua-Knot® II
water trap
SAM is the smart, single source for anesthesia gas and vital signs monitoring...it's the new
generation of infrared technology from GE Medical Systems Information Technologies.

*Without O2 is optional