Physio Control Lifepak 10

Click to enlarge

The Lifepak 10 is available in models: 10, 10P (pacing), and 10C.  These units are primarily used in Ambulances and Emergency Rooms because they are a lightweight, portable defibrillator monitor with a built-in recorder.  Lifepak 10s are battery operated, AC adapter optional.  However, a separate battery charging system is required (not shown).  LP 10s meet current ACLS standards and have an easy-to-read display.

SPECIFICATIONS

• Dimension CM:  10.4cm x40.6cm x 37cm
  Dimension Inches:  4" x 16" x 14.6" 
• Weight:  9 kg; 20lbs
• Battery:  3 NiCad batteries, 12V, 1.0 amp hours each.  A new Battery Pack registering at least 100% capacity on the Battery Support System will provide at a minimum: 45 minutes of monitoring or 30 minutes of pacing or 25 discharges at 360 joules per Battery Pack
• ECG Lead Selection:  Paddles, I, II, III
• Input:  Isolated ECG via quick-Look defibrillator paddlews, Fast Patch electrodes, or 3-lead patient cable.
• Cardioscope Display Size:  72.55 mm (2.85 in)  x 43.5 mm (1.7 in), non-fade.
• Defibrillator Waveform:  5 msec monophasic pulse (Edmark) per AAMI spec.
• Energy Select:  0, 5, 10, 20, 50, 100, 200, 300, 360 joules.
• Paddle Controls:  Charge (with indicator light); Record (activates strip chart recorder); Energy Select (rotating dial 0-360j); Discharge (dual energy discharge buttons, on on each paddle).
• Charge Time:  Charges to 360 joules in less than 12 seconds above 0°c.
• Paddle Area:  82 cm2
• Synchronizer:  Delivers energy discharge within 20msec of sync marker on cardioscope.
  
  Strip Charge Recorder
• Paper Size:  50mm x 30m
• Paper Speed:  25m / sec
• Annotation:  Includes time, date, lead, gain, heart rate, defibrillator and / or pacing parameters.
• Critical Event Record:  Digitally stored record of critical ECG and device parameters.